Reply by teejk

  • Advertise with us

Posted on Dados in table saw

View teejk's profile


1215 posts in 2683 days

#1 posted 11-06-2012 08:37 PM

gabo…15” long? that explains some more…TS will generally produce a uniform cut on longer pieces but on a piece that short, you are dealing with flatness of the table and the throat insert (when I was young we had something called a teeter-totter on the playground).

If you have the stock then run a longer piece and cut out the part you want.

or deal with the 1mm…that’s really nothing in the real world but I can see cases where it would be noticable (most likely only to you). so try the feather board mounted to the fence. it seems to work better than push pads for me

2” stock running 1/2” from the fence makes me cringe but that’s just me…bad experience a few years ago on short/narrow stock on my trusted TS…I don’t blame my TS, I blame me.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics