Reply by Greg The Cajun Box Sculptor

I have used a method of trimming the width of doors that I found to be very easy. I used a piece if 3/4 plywood that was laying arouns my shop. It was 6” wide and 8 ft long. I used it as a straight edge guide for my circular saw. I marked the point where I wanted the cut and them measured 3” from there to clamp the plywood to the door. I used 3 inches because this was the distance from my circular saw plate edge to the outside of ther blade.

I have used this many times and it is accurate and easy.

-- Every step of any project should be considered your masterpiece if you want the finished product to reflect the quality of your work. http://www.FineArtBoxes.com