Reply by Gshepherd

400 bucks, I bet 350 you can take it home… Good deal if you ask me… switch from 1/4 to 1/2 router bits, or 3/4 bore shaper cutters…. Even larger if you have the t-bushings. I think 10,000 rpm is max so you just feed a little slower on the smaller bits. I paid 1500 for my Delta the guy threw in a Power feeder. You can pick up good shaper cutters at your local saw sharpening store I bet… Good dual purpose machine, a 3 1/4 PC router alone will cost you 400 bucks…....

-- What we do in life will Echo through Eternity........