Reply by Don Broussard

  • Advertise with us

Posted on Delta T2 Fence on a Craftsman 113 TS

View Don Broussard's profile

Don Broussard

3528 posts in 2218 days

#1 posted 10-28-2012 11:18 PM

@Tedstor—The bevel mechanism on my saw is very tight. I can move it but it takes a lot of effort, so I just leave my saw to cut 90’s virtually all the time. I will move the switch anyway so if I can loosen the bevel mechanism I will be able to make bevel cuts. I suspect that your are talking about the motor-to-switch cord and not the switch-to-power cord. I actually have a “new” switch and cord I got from one of our fellow LJs.

I do need to work on the saw to see if I can free up that mechanism and set the 45 and 90 degree stops.

-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics