LumberJocks Woodworking Forum banner

Black paint and oak stain

3K views 7 replies 7 participants last post by  Tennessee 
#1 · (Edited by Moderator)
I was watching "Overhauling" another of my obsessions, old cars and trucks. In one show they were overhauling a 54 Ford truck. The wooden bed was finished by painting first with black paint, wiping off with acetone, and then staining with golden oak. Has anyone tried this before and what were your results? Looked pretty sharp.
 
#4 ·
This is a style of glazing which that adds depth to the finish. You didn't say what kind of wood was in the bed. I suspect oak because then the black paint would fill the pores and the acetone would only remove the paint from the uppermost surface, though probably not entirely, and then the oak stain would tie it all together. I'm sure it looked fantastic.
 
#6 ·
Love Overhauling!

The other approach is to glaze with asphaltum, which is basically roof tar (fiber-free) and can be found at a local big box store. Basically wipe on and wipe off the areas you want. Wipe the entire thing and you'll get some nicely filled pores and pretty grain. Regardless, I would do this as a glaze, meaning that you will seal the wood first with some kind of clear coat, like shellac.

Haven't tried putting paint down first, but I have done similar with dark dyes, sanded down, and then topped with other color dyes. The effect is to pop the grain and make the color dyes blend into a variety of brightness gradients according to where the black color was left.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top