LumberJocks

Reply by Grandpa

  • Advertise with us

Posted on Electrical problem, or tool failure?

View Grandpa's profile

Grandpa

3156 posts in 1341 days


#1 posted 10-23-2012 05:22 PM

It is good there is no aluminum. It was used years ago and there is still a lot of it out there. You know, after the capacitor is tried if you still have a problem I am one that would take the tool to a motor shop if you have one. We have such a shop and they can tell you what is wrong with tools in a few minutes. The cost is nominal and they could tell you about how much to diagnose before they start.

Now for the electric service. Dropping to 80 volts is not a normal thing. This system sounds overloaded. The services of as good electrician is not terribly expensive either. That is quick and if the guy is good he can probably pinpoint the problem pretty quick.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase