LumberJocks

Reply by Dusty56

  • Advertise with us

Posted on Cutting Board Groove

View Dusty56's profile

Dusty56

11644 posts in 2321 days


#1 posted 684 days ago

A template would be easiest if you only make one size board.
I use a router edge guide because I make all different sizes of boards.
I used to use my 690 PC router but since I got my Bosch Colt , it is much easier to handle and a lot less strain. Multiple passes are the key along with a new or very sharp round nosed bit.
Variable speed motor will help you to prevent burns when you slow down the feed rate coming into the corners. Practice many times on scrap wood before cutting into your project board , especially joining the corners of the groove. Stop when the groove looks good to you. It doesn’t have to be any specified depth.


And this ugly duckling I made with a juice “well” that the grooves drain in to : )

-- I'm absolutely positive that I couldn't be more uncertain!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase