LumberJocks

Reply by paratrooper34

  • Advertise with us

Posted on Set on a handsaw?

View paratrooper34's profile

paratrooper34

760 posts in 1618 days


#1 posted 10-07-2012 08:41 PM

Two sources I read and follow both addressed removing some of the set from a hand saw and they both said to lightly draw a file down each side once or twice. Lightly is key. Then try cutting to check your progress. You can make another pass if necessary. I would advise against putting it in a vise and crushing the set. The amount to remove to get the set right is very small and crushing in it in a vice can remove it all very quickly and unevenly. I fixed a rip saw that had a massive set on it and just two passes each side with a file got it done.

Good Luck.

-- Mike


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase