Reply by BerBer5985

  • Advertise with us

Posted on Just picked up a Delta DJ-20

View BerBer5985's profile


445 posts in 2420 days

#1 posted 10-02-2012 04:41 PM

Ok, perfect. I bought 25 feet of 10/3 wire and will hopefully have it all hooked up by tonight so I can get the blades changed out and set and tune it up, although I don’t believe it needs much. Should I be worried about the slight dip in both the infeed and outfeed tables? It’s just in the middle of both and it’s only .0035” on one and .002” on the other? It doesn’t sound like much to me, but with a straight edge, there’s slight light under each middle section. My old craftsman jointer had completely flat tables with absolutely no light. I’m sure with the delta being moved from different places over time and people picking up on the long end that it might have caused that to slightly get out of flat. Is it big enough to worry about?



-- Greg, Owner, Quality Carpet One,

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics