LumberJocks

Reply by Charlie

  • Advertise with us

Posted on Moving a 14" bandsaw - advice please

View Charlie's profile

Charlie

1001 posts in 873 days


#1 posted 651 days ago

OK, this is interesting. I went looking for a manual for a model 52-965 and came up empty. Went to Delta’s parts web site and it referenced models 28-203 and a model 28-280. The 203 is an open stand model and the 280 is the closed stand. The model 52-965 number is apparently on the stand and I’m still not sure if that’s the stand itself or what, but I got the manual for the 28-280 and it appears to be this exact saw AND on the closed stand.

Doesn’t say how to remove the table, but I can’t see that being real hard to figure out.

I want to see how the motor controls and wiring are routed through the base. Doesn’t look like the base itself has much weight. It’s kinda looking like if I take the drive belt off, and unbolt the on/off switch from the saw body, I’d be able to take out 4 bolts to separate the saw from the base. If that’s the case, this could be fairly easy to break down and reassemble and nobody gets hurt :)


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase