LumberJocks

Reply by Grumpymike

  • Advertise with us

Posted on flat bottom dado

View Grumpymike's profile

Grumpymike

1153 posts in 1039 days


#1 posted 09-13-2012 03:45 PM

Good morn’in
now I see the problem on the arbor. Yes there is a “void” at the end of the threads that could let that second balde (chipper) be a bit ofset and now it would stand proud of the rest causing the uneven dado. My photo cought the problem and I didn’t know that I was looking right at it all along. ...
I will try the JB Weld first, then see if Rigid will make an adjustment on the replacement arbor or what.
I can’t thank all of you enough for your help.
I will add that Teejk and Binghamptoned are right about using the jointer pads, I use the feather boards in the ‘T’ slot on the rip fence and use the push pads to feed the board across the cutter. I have this fear that the board will shatter and leave my hand to deal with the spinning cutter … (shrug and shutter) ... just my phobia.
Thanks again,

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase