Reply by muleskinner

  • Advertise with us

Posted on flat bottom dado

View muleskinner's profile


896 posts in 2399 days

#1 posted 09-13-2012 02:48 AM

Grumpy, try this – put one of your blades on the arbor hard against the back washer. Try to move it up and down to see if there is any slop between the blade bore and the arbor. Now slide it out onto the threaded portion of the arbor and repeat. I found a .002 difference on mine and I had exactly the same snaggle-tooth dadoes. I put the stack on my RAS which has a straight cut arbor and had smooth bottomed cuts.

-- Visualize whirled peas

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics