LumberJocks

Reply by WDHLT15

  • Advertise with us

Posted on Why Is Rough Sawn Lumber Cut In Such Long Lengths?

View WDHLT15's profile

WDHLT15

1172 posts in 1164 days


#1 posted 09-09-2012 12:15 PM

It is because of efficiency and handling. If you are sawing, then time is money. Sticker Stacking a 10’ board is twice as fast as sticker stacking two 5’ boards. Also, if you are sawing a 10’ log versus a 8’ log, once the log is on the mill, it takes a little more time to cut the boards off the 10’ cant versus the 8’ cant, but you get 25% more BF produced. It takes 5% more time to saw and you get a 25% boost in BF production, so you get a net 20% boost.

The big mills really focus on efficiency as the wholesale lumber business is a dog-eat-dog commodity business. Even us little guys try to be efficient. I like 10’ because that gives the user a lot of flexibility. 8’ is easier to handle. Also, the longer the log, the lower the yield because of taper in the log.

Good question. There is a whole Science around this question.

-- Danny Located in Perry, GA. Forester. Wood-Mizer LT15 Sawmill. Nyle L53 Dehumidification Kiln


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase