LumberJocks

Reply by Loren

  • Advertise with us

Posted on Festool multi-function vs Benchmark table

View Loren's profile (online now)

Loren

7734 posts in 2337 days


#1 posted 09-02-2012 10:26 PM

MFT really excels at work holding, not breaking up 4×8 sheets.

When I was doing some cabinet work on an MFT, I would break
down 4×8 with a TS55 on a pair of sawhorses with a pair of
2×4s laid across them for crosscuts. When the whole sheet
needs to be ripped in half, add another pair of 2×4s so each
half of the sheet is supported.

I never ripped on the MFT, I just used it for crosscutting. It
works well for squaring pantry sides and other long panels
under 25” wide.

-- http://lawoodworking.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase