Reply by Scott Wunder

Posted on Blade will not lower completely below table

13 posts in 697 days

#1 posted 692 days ago

It is frustrating when the only table in your shop that has a chance to have a clear work surface on it, is also the one with a blade sticking out. I have an old Delta Unisaw that does the same thing. Mine will lower completely if I grab the handwheel and pull it towards me. There is some hidden slop in there that doesn’t show up otherwise. When I do this the blade drops about 1/8 inch and doesn’t stick up above the table.

-- Scott Wunder, WunderWoods, St. Charles, MO. Read my sawmilling and woodworking blog at http://www.wunderwoods.com

Go to Pulse page »

LumberJocks Pulse

	Author	Latest activity		New comments or replies since you last checked
Lumber stamps what do they mean?	Oneway57	2 minutes ago	by SamuraiSaw	sign in to get readership tracking
What is it?	fhdguy3441	2 minutes ago	by Yonak	sign in to get readership tracking
Tablesaw sled	DKV	3 minutes ago	by distrbd	sign in to get readership tracking
Cloudy after staining. NOT blushing/humidity issue. ~~PHOTO~~	Golden47	5 minutes ago	by Clint Searl	sign in to get readership tracking
Padauk and Maple Coin Case	CharlieM1958	7 minutes ago	by CharlieM1958	sign in to get readership tracking
BillFold's Profile	BillFold	7 minutes ago		sign in to get readership tracking
Sadrhs's Profile	Sadrhs	11 minutes ago		sign in to get readership tracking
verygoodgirlseka's Profile	verygoodgirlseka	15 minutes ago		sign in to get readership tracking
Sled to crosscut live edge slab	CharlesA	19 minutes ago	by mrjinx007	sign in to get readership tracking
The joys of rust hunting #4: Show off your latest find(s)	Don W	20 minutes ago	by Don W	sign in to get readership tracking

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics