Reply by gfadvm

  • Advertise with us

Posted on Methods and devices for accurate table saw blade and router bit height measurement.

View gfadvm's profile


14940 posts in 2685 days

#1 posted 08-24-2012 02:14 AM

I made a set of set up blocks from Jatoba drum sanded to exact thickness. Finding TDC on the tablesaw is critical so I usually lay a straight edge across my set up block and raise the blade while turning it until it just kisses the straight edge. Then I ALWAYS cut a piece of scrap to confirm the setting. I have used drill bit/router shanks for spacers when setting up my box joint jig but have learned that all 1/4” shanks are not the same.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics