Reply by MedicKen

  • Advertise with us

Posted on Picked up a Rockwell 34-440 table saw

View MedicKen's profile


1615 posts in 3489 days

#1 posted 08-14-2012 03:45 AM

The model 10 is probably one of the best made contractors saws ever made. There are a lot of them out there and parts are still readily available, not all through Delta but on owwm.
The link belts in my experince have actually increased vibration and slippage. If you look at the way the links are made they are FLAT, not in a V-shape. Therefore they do not fir into the pulley as a V belt would. Under power they tend to slip. But that is my experience only and I have heard of others with the same issues.
The 6203 bearings are readily available at just about any bearing house. I use Accurate Bearing exclusively. Their prices are the best I have found and always have what I am looking for.

-- My job is to give my kids things to discuss with their

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics