LumberJocks

Reply by CharlesNeil

  • Advertise with us

Posted on Charles Neil Tapering Jig Question

View CharlesNeil's profile

CharlesNeil

1170 posts in 2614 days


#1 posted 08-10-2012 12:59 PM

its a 2 step process, draw the size of the foot you want, and of course the exit point, set the jig up as you normally would for a 2 sided taper, but of course your removing a much smaller amount because you will be removing material from both sides, then cut 2 sides, then re adjust the jig to cut the other 2 sides, you have to do this because you removed material from the 2 sides , so you have to readjust to compensate for it. Hope this makes sense,


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase