Reply by nwbusa

  • Advertise with us

Posted on Ridgid R4512 TS -- shop built folding outfeed table & router insert

View nwbusa's profile


1021 posts in 2281 days

#1 posted 08-10-2012 07:21 AM

James, check out my shop page in my profile, it shows a couple of shots with the mobile assembly table set up. As for the saw, I really do like it. I spent some time getting it really dialed in, and invested in a some better blades. I rip 8/4 hard maple with no problems. IMO, it’s a very good saw for the money.

Tom, I had some very minor chip out when I routed the melamine. When I redo the router table, I’ll probably use MDF and top it with Formica or something similar. It didn’t turn out too badly, though.

David, the saw doesn’t get moved much anymore… cars live in the driveway now. But the balance of the saw was not adversely impacted as far as I could tell. There’s considerable mass in the saw to keep it from being tippy. I did always collapse the outfeed table before moving it, though.

Thanks guys for the interest. :)

-- John, BC, Canada

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics