Reply by coloradobob

  • Advertise with us

Posted on Toy Builders

View coloradobob's profile


26 posts in 3552 days

#1 posted 09-05-2008 03:18 PM

I made a master template of one single track. With that I cut a piece of walnut stock about 18 to 24 inches long and 1 3/4 by 3/4. I used a table saw with a dado blade to plow the center of the track first. Then I attached an aux. fence to the saws rip fence. With the template I set the fence up to cut the other side. With the shape of the track cut I set up my band saw to cut the thickness I needed. Hope this helps. Keep the saw dust flying and be safe. coloradobob

-- coloradobob

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics