LumberJocks Woodworking Forum banner

How to handle porous woods

2K views 5 replies 4 participants last post by  gfadvm 
#1 · (Edited by Moderator)
OK… Novice here - only been doing small stuff (boxes, etc) for about a year and would like the opinions of some of my seniors here on LJ.

What have you found to be the best and/or easiest way to finish porous woods to get that glass like smooth finish and avoid the "pitty" look shown here on my latest project (http://lumberjocks.com/projects/69104)?

I appreciate your help friends.
Dano P

photo70
 
See less See more
1
#2 · (Edited by Moderator)
It takes a lot of coatsof finish and a lot of rubbing between coats. If you use a paste filler before the finish that will fill a lot of the pores. I just put a coat of finish on then sand with 320grit dry. The next coat I go to 400wet or dry depending what I feel like. Then next few coats I will sand with 600 grit wet. When the finish is looking pretty deep and smooth I will switch to 1200 grit wet. After the last coat I use a 0000steel wool and soapy water to get rid af any dust then polishing compound to get the shine back. The number of coats you need will vary with the wood and the type of finish.
 
#3 ·
Trying to fill pores with finish is a long arduous process. TimberMate grain filler is very easy to use and quickly solves the pore problem. It comes in matches for many types of wood and I use it a LOT! Woodcraft is the only local source for me.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top