Reply by Loren

  • Advertise with us

Posted on How do you attac edge banding?

View Loren's profile


10477 posts in 3768 days

#1 posted 07-03-2012 02:06 AM

Just glue and clamp. The particleboard wouldn’t hold screws well
anyway. You can nail it if you want to help position it but at 3/4”
thick nailing alone won’t substitute for clamping.

If you are short on clamps, use two and put a nail in between,
then move one and check to make sure the nail is holding it
tight. This is a bit easier with an air nailer. I use 15 ga. or 18 ga.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics