LumberJocks

Reply by knotscott

  • Advertise with us

Posted on Need some help in choosing a table saw

View knotscott's profile

knotscott

5610 posts in 2130 days


#1 posted 05-17-2012 11:17 AM

Mitch – I wouldn’t pay $400 for a used G1022Z (it’d take the G1022ProZ to warrant that much, and even then it’s not a steal), and if you don’t need portability from jobsite to jobsite I’d skip the portables….every mechanical advantage goes to the stationary saws. Of those you listed, that leaves the Ridgid R4512. It’s worth noting that the Craftsman 21833 is essentially the same saw (both made by Dayton). You’ll need to check the alignment closely …some have been defective and deviate when the blade is raised. Get a competitors coupon to help with price if you go this route.

Option #4 is a great option if the right deal comes along, and if you have 220v available (or can get it). It never hurts to patiently watch CL…be ready to move quickly. If you’d post your general geographic region, other members might know of a deal for you.

Whatever saw you get, align it well, and put a good blade on it.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase