Reply by Dusty56

  • Advertise with us

Posted on Efficient setup for taking stock to thin thicknesses

View Dusty56's profile


11819 posts in 3717 days

#1 posted 04-22-2012 07:38 PM

My suggestion was in response to the information given in the original post.
You didn’t mention that you were trying to mass produce these thin pieces of wood.
Trying to sand oily woods without clogging the grit , especially the finer grits , is virtually impossible , hence the card scraper thoughts. You don’t mention if you need both sides to be perfectly finished in the end , only that you want to reduce the thickness. My next attempt would be using a Sand-Flee , but that might also be too labor intensive for your needs. Sorry.

-- I'm absolutely positive that I couldn't be more uncertain!

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics