LumberJocks Woodworking Forum banner

1939 Walker-Turner Driver Line Drill Press Series 700

20K views 14 replies 12 participants last post by  dhazelton 
#1 · (Edited by Moderator)
For Sale Very Reasonable Price
$300.00
Totally restored
1939 Walker-Turner Driver Line Drill Press Series 700
1/2" Jacobs Chuck, 4 Ball bearing shaft.
Please read the Manufacturers AD that I've posted for all the details.
You can Watch the VIDEO also.. it's posted below.
I'm located near Niagara Falls Canada…
You can email me at: thelaserguy@cogeco.ca if you want it..:)

If your looking for a Quality Drill Press for your
workshop.. you just found it!
They don't make them like this anymore.
One thing about Quality Vintage tools.. they always retain their value.

This is a very RARE Drill Press.. if you do an internet search
to this link: ASTRO-TOOLS
and scroll down to "DRILLS"
you will find another one listed at $750.00 and NO PICTURE..
Their listing #: 04636 17" WALKER TURNER Drill Press, Step Pulley Drive

Gas Wood Machine Engineering Toolroom


Engineering Machine Toolroom Metal Workbench


Bottle Drink Glass bottle Alcoholic beverage Gas


Font Parallel Publication Newspaper Machine


<iframe src="http://www.youtube.com/embed/LXBd0lTdoVw?rel=0" frameborder="0" height="315" width="420"></iframe>
 

Attachments

See less See more
8
#6 ·
David: Very nice. I am currently cleaning up my grandfather's drive line press for use. I think it is a series 700. Looks similar to this one but with no intermediate pulley post. I even bit the bullet and am having the original motor rebuilt.

Can you tell me where you found the Walker Turner literature you show above?

Thanks
Bo
 
#7 ·
I have that same press, save mine is about a 1941 model. Not painted as nice as yours, but the same thing. Been trying to sell it for $200 for about two months. Not a single taker. Runs perfectly. I live in SE Tennessee, Chattanooga area.
 
#9 ·
Bearings can be found for almost anything with some looking. The Internet is a wonderful thing for doing this looking.

I have a 1940s era Walker-Turner all cast iron 14" bandsaw that I treasure. Its a monster! The most solidly built machine I have in the shop.

Planeman
 
#12 ·
I've got a similar floor model. Bought it off Craigslist a couple years ago-it had been sitting in a brake shop for years and years and was completely covered with grease and grime.



Brad speaks the truth: OWWM has a lot of info, so search the threads. The spindle bearings are odd sizes, but I ordered a new set from Walker-Turner Serviced Machinery (WTSMLLC@juno.com). Apart from that, it's pretty uncomplicated. The spindles are pot-metal, so be very careful when you pull them. Use some plywood to make support for each tier when you use a puller, and use some penetrating oil on the shaft. I probably used half a thing of 3-In-1 oil getting all the moving parts loose and clean.
 
#13 · (Edited by Moderator)
shampeon - really interesting wheel on that one. Wonder if it was a marraige…..

I have a Craftsman/King Seeley benchtop DP I restored with new motor bearings, quill bearings, switch and wiring, paint and Jacob chuck jaws (The jaws cost twice what I paid for the whole DP). I also have a 1930s Delta DP220 floor model drill press I got for $40 and just cleaned up. I laugh to myself when I see people in Harbor Freight looking at the drill presses when so much great old stuff is out there for a lot less money. And everyone complains about the run out on new machines - there isn't any on my old equipment.
 
#14 ·
It's an original wheel, the so-called "captain's wheel" or "ship's wheel" version of the 900.


I totally agree on buying used for better and cheaper. My W-T replaced a generic Taiwan benchtop from the early '80s that I bought off Craigslist for hardly anything, and it was a solid, solid machine. I kind of miss the geared table lift on it, to be honest.
 
You have insufficient privileges to reply here.
Top