LumberJocks

Reply by killerb

  • Advertise with us

Posted on Walnut slab finishing questions.

View killerb's profile

killerb

150 posts in 1149 days


#1 posted 04-13-2012 11:19 PM

Take the bark off and sand the edges. I stop sanding at 150, but that is me. I spray a clear finish on my slabs , except for walnut. I use a walnut dye first. It adds very little color, but warms it up a bit. If you want the sap on the piece , skip the dye. Just spray 3 coats of a clear finish. If you want a water base finish, add a coat of clear seal a cell first and let dry. Then spray your water base over that. It will warm up the wood a bit. As Jim says above, depending what you want to do with it, that will tell you what type of top coat you want. bob

-- Bob www.bobkloes.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase