Reply by GaryK

The woodslicer blade I mentioned has a variable tooth spacing from 3 to 4 teeth per inch.
This will reduce vibration a lot and give you a smoother cut.

For resawing I use a 3/4” blade on my bandsaw that has a feature to remove the tension by moving a lever after I am done using it.

I use a 1/2” blade on my saw that does not have that feature.

Your saw will run too fast to cut anything other than aluminuim or brass. Don’t go cutting any ferrous metals
with it.

-- Gary - Never pass up the opportunity to make a mistake look like you planned it that way - Tyler, TX