LumberJocks

Reply by 330treehugger

  • Advertise with us

Posted on Finish for Walnut Slab Coffee Table

View 330treehugger's profile

330treehugger

5 posts in 859 days


#1 posted 859 days ago

Great slab! I have made several live edge pieces and used MirrorCoat to fill voids. You can see into them and they are filled smooth with the top. After curing, I just belt sand smooth and then sand the whole top ready for finish. System Three advised that I wait at least 5 days to spray lacquer onto the surface after cure. I also had trouble with the material running through the bottom and have a call in to System Three for advice on sealing the bottom. It eats right through tape and even squeezed past clay stuffed into the bottom of voids.

As for a durable finish. You could use Spar varnish or MirrorCoat for the top. I use a two part conversion varnish from ML Campbell called KlearVar but if you don’t have spray capability better to go with either of the two former products.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase