LumberJocks Woodworking Forum banner

Ryobi router base plate

Tags
router
16K views 6 replies 6 participants last post by  Grandpa 
#1 · (Edited by Moderator)
I have a Ryobi 2 HP Plunge Router that I bought at home depot. I am looking for a baseplate for it to attach guide bushings. Does anyone know wether the universal type plates they sell at the wood working stores will work? or does anyone have ideas where to search?

Thanks in advance.
 
#2 ·
This will fit:
http://www.amazon.com/Milescraft-1201-Plate-Bushing-Routers/dp/B001JEOMN2/ref=sr_1_2?s=hi&ie=UTF8&qid=1330732383&sr=1-2
The set comes with diagram and list of router models. For Ryobi PL180 it is three elongated slots. On your router thin plastic plate on the bottom may cover some holes. Look on the top of aluminum base and cut through the plastic if needed. Also, I recommend bushing set with metal tips. There are two versions: all plastic (in the link), and plastic inserts with brass tips.
 
#4 ·
Thank you for that link Viktor. I looked at that option. However I have a full set of brass bushings that will not work for that particular plate. I was hoping to find an adapter insert or new plate that will enable me to use them.

NiteWalker, could you give me some pointers or some idea on how to do that? I'd love to give it a go. I have no experience in metalwork though and with the exception of a hacksaw dont think I own any tools for it. So I hope making one doesnt entail messing with metal.
 
#6 · (Edited by Moderator)
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top