Reply by oluf

  • Advertise with us

Posted on How can I create this profile?

View oluf's profile


260 posts in 3061 days

#1 posted 02-25-2012 03:11 AM

Take a piece of stock long enough for all four sides plus some extra for your saw kerfs at your miter cuts for the corners. Cut the concave profile on the table saw. use guides at an angle to the blade to guide your work piece and take multable cuts raising the blade slightly after each pass. After you have the concave profile cut. use a hand plane and sander to create the round over for the lower half. The bottom of the box will give you the bottom trim. When you cut the miters make sure that adjacent cuts make matching miters on the three corners that you can.

-- Nils, So. Central MI. Wood is honest.Take the effort to understand what it has to tell you before you try to change it.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics