LumberJocks Woodworking Forum banner

Help identifying the age of this jointer?

2K views 9 replies 7 participants last post by  eric4716 
#1 · (Edited by Moderator)
Wood Machine tool Gas Thickness planer Table


Jointer listed for sale without much information with it. The plate says Delta if I make it out.

Unsure if the wiring is even connected - appears to be a 220v cord on it.

For the size, the price seems decent even if some work needs to be done (unless the motor is shot).

Thanks.
 

Attachments

See less See more
2
#3 ·
Can't really tell from the picture if that is a "Delta/Milwaukee" or a "Delta/Rockwell" badge… the former was used from around ~1954 to ~1966, while the later was used from ~1966 to ~1977, so there is your range. You can narrow it down to a specific year if you get the serial number.

Cheers,
Brad
 
#7 ·
Thanks Ripper, that is the one.

After a search of that model number, it looks like there are some parts missing to it. Sometimes I get a feel for the way somebody takes care of their equipment by what the rest of the shop looks like (as seen in photo).

Thanks again all, I think I'll take a pass.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top