Reply by jockmike2

  • Advertise with us

Posted on cheap router raiser for router table

View jockmike2's profile


10635 posts in 4212 days

#1 posted 04-26-2007 04:29 PM

No Niki I don’t do anything as far as letting off the pressure, but probably should. I do have two other plunge routers so it is dedicated to the router table. Woodspar, because of the air vents in the top of the router I use a wooden plate with four dowels screwed to it to leave a small vent crack for the router. I put some rubber on the tips of the dowels to not mar the router. You could use carpeting or anything to not leave marks on your router. Like I said I’ve used this set up for 3 yrs with no problems with 2 different routers. Nothing happened to the first router I just put in a 3 hp router in place of my first 2 hp. Hope that helps. Any other questions feel free to ask. It works great.Mike

-- (You just have to please the man in the Mirror) Mike from Michigan -

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics