LumberJocks

Reply by Frank

  • Advertise with us

Posted on Glue up of thin pieces

View Frank's profile

Frank

19 posts in 1064 days


#1 posted 01-27-2012 01:10 PM

I agree with Jo Lydon. Just remember to put blocks under your two outside clamps on both ends of the clamp and put the middle clamp on top facing down, not underneath like the outside two. The blocks will raise the height of the two outside clamps (off the table) and allow the upper middle clamp to come down closer to the wood and reduce the cupping. Remember that too much pressure from your clamps will not only cup the wood but could end up starving the joint of all the glue due to excessive squeeze out. Just a thought, hope it helped Dewayne.
Frank


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase