LumberJocks

Reply by sras

  • Advertise with us

Posted on How deep should router bit be in the collet?

View sras's profile

sras

4924 posts in 3307 days


#1 posted 06-09-2017 03:09 PM

If you look at your collet, you can see the jaws that do the actual clamping. As long as the bit is fully engaged in those jaws the bit is deep enough – at least for the consideration of the collet clamping the bit.

Whenever possible, the guideline you shared is preferred. You want the forces of cutting as close to the collet as possible.

-- Steve - Impatience is Expensive


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com