LumberJocks

Reply by TCCcabinetmaker

  • Advertise with us

Posted on How do you identify the parts you cut?

View TCCcabinetmaker's profile

TCCcabinetmaker

925 posts in 951 days


#1 posted 930 days ago

Well, define large cutlists.

Usually if I need to keep track of parts, I will write what it is on the edge grain, if it’s plywood it won’t be visible, if it’s wood, then I can sand it away when I sand the edges easily enough. But honestly in most cases, just working by myself, I know what the part is, no one is going to move it, mix pieces together, or anything else. If I have questions, I just measure and look at my cutlists.

The danger with a sticker is that they are adhesive, if you leave them there too long, then you’re going to end up having to clean the sticker off because it will attach itself. If you do use a tape, get a low tack tape, it will take longer to stick itself permanently, and it won’t pull the veneers on thin veneered plywoods like even blue or green tape will. (Low tack is typically white, and will cost a little more than the normal painters tapes, and will be marked in some method as low tack.)

-- The mark of a good carpenter is not how few mistakes he makes, but rather how well he fixes them.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase