LumberJocks

Reply by PurpLev

  • Advertise with us

Posted on Dewalt Drill

View PurpLev's profile

PurpLev

8476 posts in 2282 days


#1 posted 974 days ago

FYI -

chucks don’t like liquid based lubricants or WD40 unless you are using it to clean it and then completely dry (as in take off the jaws and really fully dry it) – what might happen is that then dust, debris, sawdust, chips and the likes will get caught in the liquid/paste/grease and will jam the chuck even further to the point it can ruin it.

there is graphite lubricant for chucks that is in dry form for this purpose.

most likely something is stuck in there or it has started to rust, or is simply dirty (just thinking of the possibilities), see if you can fully open it, and clean it with some brushes – see if you can see any debris or anything else stuck in there and try to lube it with graphite.

-- ㊍ When in doubt - There is no doubt - Go the safer route.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase