LumberJocks Woodworking Forum banner

Using my pneumatic stapler

1K views 6 replies 7 participants last post by  tmasondarnell 
#1 · (Edited by Moderator)
I just wondering can I use my pneumatic stapler to secure some garden mesh wire to a 2×4 wooden frame ..

I'm wondering if the psi will be too strong to not tear through the mesh ( the mesh is 14 gauge)

Thanks…

I'm wondering if it's just a question of lowering the psi output of the stapler
 
#6 ·
Yes you can, but you have to adjust the air pressure so you will not ruin your wire. You can also try shooting through a scrap of 1/4 inch ply to pad the mesh. (this will cut down on visibility so it's a trade off, but do-able)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top