LumberJocks

Reply by Bill White

  • Advertise with us

Posted on Best way to do accurate miters--shooting board?

View Bill White's profile

Bill White

4787 posts in 3773 days


#1 posted 12-03-2011 10:01 PM

You didn’t say what you’ve done about the TS. What kinda lumber are ya gonna use? If the wood is going to be from a borg, well…...I’d let it stabilize a bit before I did any dimensioning. If the wood is pine (which I don’t suggest) it will probably “wiggle” a bunch. The miters will open after cutting.
I’d spend time getting the saw tuned up properly. You should be well able to create good miters with a TS. It would take a good miter gauge with “stops” so you can cut accurate lengths, and of course it will require the miter slot to blade adjustments to be correct.
If you can give us more info we’ll be better able to help.
Bill

-- bill@magraphics.us


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com