LumberJocks

Reply by thumbs

  • Advertise with us

Posted on Finishing Walnut

View thumbs's profile

thumbs

22 posts in 2679 days


#1 posted 2661 days ago

i am humbled after looking at Karson’s pulpit. That is beautiful. I had good luck with a few projects using some native walnut I acquired. I used boiled linseed oil applied liberally, let sit for 60 min, keeping it wet with BLO and then wiped well. Keep wiping any oil that seeps. Waited a week and then used 1/2 Pratt and Lambert #38 varnish and 1/2 paint thinner mixture to hand wipe w/soft cloth, rather than a brush. Wipe and wait for 1 hour and wipe again (No
sanding necessary) Do four coats this way and then let cure for three days and sand lightly w/ 220 paper and repeat process three more times. Turned out to be a great finish. Highlighted walnut features well

-- Mitakuya Oyasin


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase