LumberJocks

Reply by lew

  • Advertise with us

Posted on Finishing pen off the lathe

View lew's profile

lew

10056 posts in 2421 days


#1 posted 11-12-2011 10:57 PM

Go to the local Vocational/trade school and check with the HVAC department. They probably have a ton of old donated furnaces. Get a blower motor- 1/3 or 1/4 HP. It will probably have a 5/8” shaft with either a key way or flat spot on the shaft. Next a motor shaft coupling to connect from the motor to a 5/8” buffing wheel mandrel. Or you could connect the motor, using the coupling to a shaft running on a couple of pillow block bearings. Mount several buffing wheels on the shaft between the bearings- instant buffing station.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase