Reply by David Grimes

  • Advertise with us

Posted on Round over bits

View David Grimes's profile

David Grimes

2078 posts in 2635 days

#1 posted 10-27-2011 07:03 PM

The roundover bits will all have the cut radius and cut depth noted on the package. The 1/4” cut radius (like a quarter round of a 1/2” diameter circle) is a smaller roundover than the 1/2” (which is like a quarter round of a 1” diameter circle). The cut depth is the height of the radiused cut on your work piece edge.

Go to a big box and compare the two drawings of the exact cut profile shown on the box and you’ll get it.

Have some fun.

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics