Reply by PurpLev

  • Advertise with us

Posted on Biesemeyer Fence

View PurpLev's profile


8536 posts in 3675 days

#1 posted 10-11-2011 02:15 AM

as far as I know (have one myself) the bies type (and clones) fences have the steel tube which is not machined to any tolerances and can be out of straight to a certain degrees, and then there are the faces on top (ply+lam) that is bolted to the steel tube over the length of the fence using 4-5 bolts (can’t remember the number right now. these bolts can be loosened and you can shim the faces to the steel tube to get a straight fence. OR you could put an additional flat board over the existing fence and shim it where there are gaps (same thing just adding another board which I find to be redundant).

makes sense to you? if not I could try and sketch it out

-- ㊍ When in doubt - There is no doubt - Go the safer route.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics