LumberJocks

Reply by Rick Dennington

  • Advertise with us

Posted on Saw blades 10" V 8"

View Rick  Dennington's profile (online now)

Rick Dennington

3332 posts in 1829 days


#1 posted 1086 days ago

Hey pal,

I can find no fault in using an 8” blade on your saw..I’ve used a 7 1/4” a few times on my old 3 .hp. Craftsman, and on my 5 h.p. Unisaw. I don’t have one, but I might suggest using a blade stabilizer on the 8”, just to see if it helps with run-out. I think it would work good also on a 10” blade…..depending on the blade, of course. I’ve even ran a 6” and 8” dado blade on mine before with no problem…only when I had sent my blades out for re-sharpening, and was out of regular saw blades…lol. When times get tough, you’ve got to get tough with them…...Go for it, pal, and see how it works…...I think you’ll be surprized…....

-- " I started with nothing, and I've still got most of it left".......


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase