Reply by Aaron Taylor

  • Advertise with us

Posted on using Epoxy to fill in cracks and holes for Juniper coffee table

View Aaron Taylor's profile

Aaron Taylor

37 posts in 3149 days

#1 posted 09-02-2011 04:52 PM


Tape wax paper to where you need to keep the epoxy in. I have used it many times and it is wonderful to work with. You might have some come out but if you make your paper extra large over the area and then tape all around it should hold just fine. I usually use a clear packing tape to to the edges of the paper. Also if you aren’t using it; a faster setting epoxy will help it from running too far. The down side to that is you have to keep mixing up epoxy if you have lots of holes and cracks.

Hope this helps.


-- "Insanity runs in my family. It practically gallops."--Cary Grant from the movie Arsenic and Old Lace

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics