Reply by GR8HUNTER

  • Advertise with us

Posted on Toy box bottom selection

View GR8HUNTER's profile


5161 posts in 918 days

#1 posted 07-16-2016 03:11 PM

If I go ply I could cut any panels pretty snug b/c the expansion wouldn t be as bad, right? Alternatively, I m thinking of putting something in the groove to prevent shifting (eg. weatherstripping)

- avsmusic1

that is correct plywood is a lot more stable then hardwood …...1/2 inch would be plenty strong enough

I ve used a small dab of silicon caulk in dados and picture frames to reduce shifting and movement. Might be an option for you.

- BurlyBob

and also do this with caulk about an inch bead on all 4 sides ….. just make sure it is silicon

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics