LumberJocks

Reply by MadMark

  • Advertise with us

Posted on Options for handling sheet goods in a tiny shop

View MadMark's profile

MadMark

979 posts in 1287 days


#1 posted 05-31-2016 10:25 PM

Here’s how we did it in the field for sheet goods. A pair of sawhorses (the cheap metal kind) with two 2×4’s lain flat on top of the sawhorses and the sheet goods on all.

Plywood / panelling:
Good face down and a 4’ level as a saw guide – normally true to +-1/8” with any reasonable circ saw.

Sheetrock:
Use your finger as a guide on your wooden rule with your utility knife, good side up. Slide to edge and snap, reach under & slit crease to separate pieces. Typ +-1/2” which is good enough for most rock jobs.

No fancy rigs, no dedicated stations, just the same field panel cutter as ever.

M

-- Madmark - Madmark2150@yahoo.com Wiretreefarm.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com