LumberJocks

Reply by NBeener

  • Advertise with us

Posted on New Workshop Posting and Dust Collection Question

View NBeener's profile

NBeener

4806 posts in 1824 days


#1 posted 03-15-2011 09:24 PM

The JDS is rated at 1250CFM.

CFM requirements, and dust port requirements, for the tools you listed are:

TS: 350 – 4”
Router: – 200-350 3-4”
Jointer: 350 4” (for up to 6” jointer)
Planer: 785 6” (for up to 20” planer)
Lathe: 400 5” (for small lathe)

So … one at a time … if you’re using large enough ports … you’ll have power to spare. The straighter and smoother your runs are, the safer you’ll be—particularly at 16’.

A good start on the math is here:

http://www.airhand.com/designing.aspx

If you HAVE a few minutes, you CAN do the actual math, pretty easily, but … without ME doing it … I think you’ll be fine :-)

-- -- Neil


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase