Reply by levan

  • Advertise with us

Posted on cabinet glue up

View levan's profile


472 posts in 2979 days

#1 posted 03-06-2011 06:46 AM

For the partition and ends,I normally use screws up through the bottom. Screwing into the edge of ply is usually not a good practice, but i feel in this case it is just pulling things up until the glue drys. If you attach the base to the bottom before glue up, the bottom should be very flat and will not require much pressure to seat the verticals. You may want to consider using cabinet squares like these to hold things square during construction. Check out Resurrected’s forum topic best wishes

-- "If you think you can do a thing or think you can't do a thing, you're right". Henry Ford

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics