LumberJocks

Reply by LeeMills

  • Advertise with us

Posted on Lathe Drive End Investments Question

View LeeMills's profile

LeeMills

522 posts in 1271 days


#1 posted 04-05-2016 01:30 PM

The Nova G3 or the SN2 will work for you. Toolsplus has the G3 fro $99 and then SN2 for $139. You will need the appropriate insert for your spindle size for either; they carry the inserts also.
http://www.tools-plus.com/nova-chucks.html

Not quite understanding your Jacobs chuck (drill) you state..
A tapered drill chuck “You have one”
You need “Are there any preferences for drill chucks that can be locked in with all-thread (to also serve for holding small items)?” Are you talking about locking in a bolt into the back of the chuck? If your current chuck has a taper to fit the tailstock it should fit the headstock. If the taper is not tapped to receive a draw bar you should be able to tap it without much problem.
If you want just a new taper you can get a drawbar style here for <$6.
http://www.victornet.com/report/Arbors-Morse-Taper-Straight-Shank-to-Threaded-End/1424.html

-- We cannot solve our problems with the same thinking we used when we created them. Albert Einstein


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com