LumberJocks Woodworking Forum banner

Design help, first project

8K views 17 replies 11 participants last post by  Gofor 
#1 · (Edited by Moderator)
Rectangle Parallel Shelving Wood Art


This is my first attempt at building furniture and I would love any advice. We bought a new stove which is a foot narrower than our old stove so we have an odd sized space between the stove and a doorway. I want to build a small table/shelf with a butcher block top to fill the space. I am thinking of using Cherry or Maple.

I designed something in SketchUp but before I start buying wood I was wondering if anyone had any suggestions/criticism of the basic design. I don't think I have all of the dimensions in the file exactly right but I am only worried about whether the general structure is sound. In particular I am wondering:

1. Do I need thicker legs? I was initially imagining it with 2×2 legs but drawing it up it started to seem like 1×2 might be enough (and I am trying to keep the cost down).

2. Do I need some kind of cross member on the ends or apron around the top to hold it together? I would like to keep it as simple as possible but I worry about it not being stable enough. Mostly it will just hold jars of oil, etc but with the butcher block top it would be nice if someone could chop something on it without it wobbling around.

3. How should I attach the shelves. Can I cut slots in the legs with the router and glue the shelves in (the way it is drawn) or is there a structural reason that I need to do real mortise and tenons (or some other method).

Thank you in advance for any suggestions.

SketchUp file: http://sketchup.google.com/3dwarehouse/details?mid=11d59526983236054699f194c80c2103
 

Attachments

See less See more
2
#2 ·
SInce I've never actually built this, please keep in mind that my answers are nothing more than my opinion, but here goes.
1. That is a matter of opinion. I think 1×2 would be plenty enough if you use quality wood. However, I think the 2×2s would be better. I tend to overbuild things. I can't see where there is going to be that much of a cost difference between the 1×2s and the 2×2s.
2. Once again, I tend to overbuild things. I think if the wood is attached together well, you wouldn't necessarily need and apron, but I think an apron would make it a lot sturdier over time. Personally, I would spend the money and add a back and sides. You could use quarter inch plywood. There are many styles of plywood to choose from. I'm partial to luan. It. I just like the look of it. Attach it to the back and sides glue and any other fasteners you see fit. This would eliminate any kind of racking or twisting that may occur.
3. I think the notch idea would be fine. As long as the legs are sturdy,besides the glue, the slats running from front to back would help hold the cross braces into the legs. The way it is drawn out, from what I can see, unless the legs move or all the slats come loose, it would be impossible for the cross pieces to fall out.
 
#3 ·
I would make the ends a complete assembly then stretchers between them, put the top on screwed from underneath, and drill shelf pin holes for the shelves so they can be adjustable, you can drill holes only where you want a shelf to be to avoid seeing a bunch of holes, then more could be drilled if you want to change the location of a shelf
 
#4 ·
I agree with the advice above, remember you'll only get better with more projects so don't be afraid to jump in, remeber what my wife still tells me to this day, "You're the ONLY one that is going to notice that" We spot the mistakes but those are learning opportunites and the mile markers of experience.

Now… the most important piece of advice… DO NOT STORE WINE NEXT TO THE STOVE! Wine racks look nice but they belong in dark cool places, wine is a living thing and light and heat will turn any wine into garbage quickly. If your wine will move off of that rack in 30 days or so go ahead… but if you're going to to have bottles there for 6 months or more, just keep dusting them and cleaning the kitchen grease off of them but don't drink 'em.. I'm looking forward to seeing the finished product.

Derek
 
#6 ·
I think that your design will want to "rack" pretty easily.

If I were designing this for a customer, I think that I would use plywood panels next to the stove and wall. The wall panel would be dadoed to accept the stove panel, and they would be glued and screwed together. This will give you a rock solid corner to work with. I would also use some reflective insulation on the wall panel to minimize heating when using the oven.
 
#7 ·
I agree with using 1/4" plywood panels for the back and sides. If it is pinched in there, between the stove and the wall, you could get away with 1×2 legs, it wouldnt have the opportunity to rack side to side. Same thing goes for the apron, if its pinched in between the stove and say the wall, i dont think it would be necessary. Remeber its just wood, changes can always be made along the way. Enjoy the creative process and remember, we're a simple bunch …. we love pictures.

Oh and welcome to Lumberjocks, look forward to seeing your creations.
 
#8 ·
You will want the rails to be wider. Tenons are better. As is, it will be too wobbly. Take a look at some Krenov style sawhorses to see a good example of this type of construction:


Note how wide the lower rail is. What you would really want to do for this type of construction would be similar but finer pieces.

Takes a little longer but not that much when you factor in having to make it again when it self destructs.
 
#9 ·
William, some does last a bit longer, you'd be suprised how the value of some wines can increase over time even quadrupling.. not that I've ever really resold any of my cellar, but WOW is it nice to have the really good stuff for years knowing you didn't have to pay the ridiculous prices for retail inventory…I think there's 100+ bottles in the cellar right now, but I just use the boxes…..maybe some racks are overdue!
 
#11 ·
I am completely in-agreement with ChefDAN, please, do not store wine next to your stove! That is one of the worst places for it in the kitchen. A rack of this nature is fine, as long as it is not next to a heat source, or in direct sunlight. Please reconsider your location.
 
#12 ·
Thanks for all the feedback. This is really helpful. It is strangely comforting that everyone does not exactly agree. I am going to beef up the structure and maybe give up the wine rack element. I was a bit concerned about storing wine next to the stove but that didn't quite seem like a woodworking question!
 
#13 · (Edited by Moderator)
I work in the wine industry and hear horror stories all the time about improper wine storage. Don't take it the wrong way, but the above rack idea, next to the stove, would be considered improper storage within the wine industry, as well as by serious wine drinkers and collectors. It doesn't matter if it's a $5-bottle, or a $500-bottle (it all spoils the same), I would suggest you find a different location to keep your wine.
 
#15 · (Edited by Moderator)
Just made a similar item for my MIL (table between stove and door).

To prevent racking, you need a couple cross braces on the end. Put one midway down the back side (against the wall) and two on the front. The top cross brace on the front can have cup hooks on it to hang pot holders. The next would be clean to hang a towel, etc.

Its next to the stove, so put a few ceramic tiles on top. That makes a trivet for setting hot pans on.

This is the one I did,:



Go

As mine had stretchers around the top and a plywood shelf on the bottom to hold her trash can, I didn't need as much "racking" prevention.
 
#18 · (Edited by Moderator)
The top is based with 1/2" oak ply (what I had) edged with oak sides that overhang the legs/stretchers. The ply was dadoed into the edge pieces 1/8" below the top, so the tile would be just a little proud. That way the hot cast iron skillets don't actually touch the wood.

The legs are 2" square at the top, tapering in 3/4" on the inside from the bottom of the stretchers. The stretchers are mortised/tenon jointed to the leg tops, and I also put angle braces in each corner (standard table construction).

The top is held by screws up through the angle braces. Because it is ply, there are no wood movement issues.

The bottom shelf assembly (also 1/2" ply dadoed into the edges) was cut at 45 degrees on the corners to match the notch in the legs. Each corner is held by a screw into the leg from underneath.

It did not rack as built, but I also made a couple other adjustments to let it sit very stable.

1st, I made it 27" deep, so that it would reach all the way to the wall when even with the front of the stove.

2nd, My MIL's floor is far from flat and level (slopes from the wall down over 1/2" in just the depth of the stove. I drilled holes in the bottom of the legs and put in 5/16" "T" nuts. I then put a nut on some 1 1/2" long 5/16" carriage bolts. Thus gave me adjustment on all four legs. (The height was 35 1/2" tall before installing the adjusters). The rounded heads of the carriage bolts keep it from marring the linoleum. Might want to cover with self adhesive felt if on wood, or rubber if on tile.

When adjusting it to be level with the stove top, I added a little height to the outside and front legs so that it has a little pressure against the stove and the wall.(just about 1/8th turn of the bolts).

It has been heavily used since July of last year, and have had nothing but compliments and thank-yous from my MIL and also all my wife and her five sisters who do all the cooking on the holidays, etc. The adjusters, and having it touching the wall and the stove have resulted in no racking or rocking.

If set out in the open subject to people leaning on it from all four sides, it would probably rack some, especially on the long dimension. With it being grounded against solid objects on two sides, (the wall and stove), it really can't do much racking. The above suggestions, an "x' brace or a solid ply panel on the stove side would eliminate any racking potential, if you feel you need to. I would if you won't be able to butt the back of the top against the wall.

Hope this helps.

Go
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top